文摘
Wastes from stainless steel production were briquetted together with carbon for smelt-reduction in the electric arc furnace, EAF, to achieve an internal recycling. A laboratory induction furnace was used to simulate the EAF. With a close simulation of the smelting, disintegration of the briquettes heated under load and recovery of metals from briquettes melted together with stainless steel and slag former were investigated. The influences of test conditions on carbon reduction of oxides in the briquettes were also examined. The briquettes endured heating at 1 186 °C under load of 3.5 kg and could be charged to the melt in small quantity without causing serious splashing. For a high metal recovery, it was necessary to charge the briquettes together with slag former. Small local zones of smelt-reduction with high carbon concentration could thus be formed during the charger heating. Silicon content in the metal near to the briquettes should be minimised to achieve a high degree of carbon reduction. Based on results obtained from this study, suggestions were made on smooth operations of smelt-reduction of the briquettes by using EAF or induction furnace with large scales.