Microstructural evolution and mechanical properties of a novel FeCrNiBSi advanced high-strength steel: Slow, accelerated and fast casting cooling rates

详细信息    查看全文

• 作者：Mohsen Askari-Paykani ; Hamid Reza Shahverdi ; ^{shahverdi@modares.ac.ir" class="auth_mail" title="E-mail the corresponding author} ; Reza Miresmaeili
• 关键词：A. Mechanical characterization ; B. Steel ; C. Casting ; Rapid solidification ; D. Phase transformation ; Twinning
• 刊名：Materials Science & Engineering A
• 出版年：2016
• 出版时间：21 June 2016
• 年：2016
• 卷：668
• 期：Complete
• 页码：188-200
• 全文大小：9140 K

文摘

In the current work, three different solidification routes and a two-step heat treatment process were applied to a novel FeCrNiBSi alloy system to introduce a new candidate for advanced high-strength steels. The evolution of the microstructure after solidification, heat treatment, and tensile deformation was characterized using optical and electron microscopy techniques, as well as hardness and room temperature uniaxial tensile tests. The effects of the different solidification routes and heat treatment parameters on the deformation and fracture mechanisms of this steel are discussed. Grain refinement, precipitation hardening, and solid solution as a result of the fast casting cooling rate led to an increase in strength at improved ductility. This result can be explained partly by the less severe stress/strain partitioning at the matrix grain/M₂B interfaces and better interface cohesion. Moreover, the stress/strain partitioning characteristics between the matrix grains and M₂B led to a higher initial strain hardening rate. The fast casting cooling rate further promoted ductile fracture mechanisms, which is a result of increased cleavage fracture stress. The higher casting cooling rate and two-step heat treatment resulted in a strong increase in formability index, from 8 GPa% to 24 GPa%, at which the mechanical properties occupy the TRIP envelope. Heat treatment of the fast-cooling specimens led to a small reduction in yield and tensile strength and 22% total elongation percentage improvement (from 10% to 32%).