The effect of influent temperature variations in a sedimentation tank for potable water treatment—A computational fluid dynamics study

详细信息    查看全文

• 作者：Athanasia M. Goula ; Margaritis Kostoglou ; Thodoris D. Karapantsios ; Anastasios I. Zouboulis
• 关键词：Computational fluid dynamics ; Density currents ; Sedimentation tank ; Temperature gradient ; Water treatment
• 刊名：Water Research
• 出版年：2008
• 出版时间：July 2008
• 年：2008
• 卷：42
• 期：13
• 页码：3405-3414
• 全文大小：1284 K

文摘

A computational fluid dynamics (CFD) model is used to assess the effect of influent temperature variation on solids settling in a sedimentation tank for potable water treatment. The model is based on the CFD code Fluent and exploits several specific aspects of the potable water application to derive a computational tool much more efficient than the corresponding tools employed to simulate primary and secondary wastewater settling tanks. The linearity of the particle conservation equations allows separate calculations for each particle size class, leading to the uncoupling of the CFD problem from a particular inlet particle size distribution. The usually unknown and difficult to be measured particle density is determined by matching the theoretical to the easily measured experimental total settling efficiency. The present model is adjusted against data from a real sedimentation tank and then it is used to assess the significance of influent temperature variation. It is found that a temperature difference of only 1 °C between influent and tank content is enough to induce a density current. When the influent temperature rises, the tank exhibits a rising buoyant plume that changes the direction of the main circular current. This process keeps the particles in suspension and leads to a higher effluent suspended solids concentration, thus, worse settling. As the warmer water keeps coming in, the temperature differential decreases, the current starts going back to its original position, and, thus, the suspended solids concentration decreases.