Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: Effect of carbon, nitrogen and phosphorus contents

详细信息    查看全文

• 作者：H. Pommier^a ; ^{harry.pommier@ensmp.fr" class="auth_mail" title="E-mail the corresponding author} ; E.P. Busso^a ; ^b ; ^{esteban.busso@onera.fr" class="auth_mail" title="E-mail the corresponding author} ; T.F. Morgeneyer^a ; ^{thilo.morgeneyer@ensmp.fr" class="auth_mail" title="E-mail the corresponding author} ; A. Pineau^a ; ^{andre.pineau@ensmp.fr" class="auth_mail" title="E-mail the corresponding author}
• 关键词：Reheat cracking ; AISI 316L austenitic stainless steel ; Intergranular damage ; Stress relaxation ; Synchrotron tomography
• 刊名：Acta Materialia
• 出版年：2016
• 出版时间：15 January 2016
• 年：2016
• 卷：103
• 期：Complete
• 页码：893-908
• 全文大小：5764 K

文摘

This work concerns a study of the mechanisms responsible for intergranular cracking during high temperature stress relaxation in AISI 316L-type austenitic stainless steels. This phenomenon, also known as reheat cracking, is typically present in heat affected zones of massive welded parts used in the energy industry. Here, five steel grades with different C, N and P contents were considered to assess the effects of chemical composition on the three main mechanisms potentially responsible for reheat cracking, namely intergranular M₂₃C₆ carbide precipitation, stress relaxation phenomena, and intergranular P segregation. After testing the five AISI 316L-type grades under reheat cracking conditions by a pre-compressed CT-like specimen technique, different degrees of intergranular damage were observed in the specimens by optical microscopy and synchrotron X-ray tomography. Detailed grain boundary analyses by SEM and TEM in the five different steel grades showed the main mechanism responsible for reheat cracking to be the nucleation of microcavities at intergranular M₂₃C₆ carbides in high residual stress regions. The addition of P was found to increase the number of cavitated GBs but not to be the dominant mechanism responsible for intergranular damage. A comparison between elasto-plastic finite element predictions of the residual stresses in the CT-specimens and the results of microstructural investigations revealed no intergranular damage in regions where the initial maximum principal stresses in the specimens were below 740 ± 30 MPa.