Microstructure and Corrosion Resistance of Dissimilar Weld-Joints between Duplex Stainless Steel 2205 and Austenitic Stainless Steel 316L

详细信息    查看全文

• 作者：Aboulfazl Moteshakker ; Iman Danaee ; ^{danaee@put.ac.ir" class="auth_mail" title="E-mail the corresponding author}
• 关键词：Duplex stainless steel ; Joint welding ; Microstructure ; Polarization ; Impedance
• 刊名：Journal of Materials Science & Technology
• 出版年：2016
• 出版时间：March 2016
• 年：2016
• 卷：32
• 期：3
• 页码：282-290
• 全文大小：3398 K

文摘

The microstructure and corrosion resistance of dissimilar weld-joints between stainless steel SAF 2205 and stainless steel AISI 316L were investigated. Welding was accomplished by different types of welding wires AWS ER 347, AWS ER 316L and AWS ER 309L. To verify soundness of welded samples, nondestructive tests were performed. Metallographic samples were prepared from cross-section areas of weld-joints to investigate microstructure of different regions of weld-joints by optical microscopy and scanning electron microscopy. Corrosion resistance of weld-joints was evaluated in NaCl solution by potentiodynamic polarization and electrochemical impedance techniques. In the weld metal AWS ER 347, the brittle sigma phase was created, resulting in the decrease of weld-joint corrosion resistance. According to the results of metallurgical investigations and corrosion tests, welding wire AWS ER 309L was suitable for welding duplex stainless steel (SAF 2205) to austenitic stainless steel (AISI 316L) by gas tungsten arc welding (GTAW) process.