Microstructure and properties of a novel titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si manufactured by laser additive manufacturing

详细信息    查看全文

• 作者：Guo-Chao Li^a ; ^b ; ^c ; Jia Li^a ; ^b ; ^c ; ^{lijia@buaa.edu.cn} ; Xiang-Jun Tian^a ; ^b ; ^c ; Xu Cheng^a ; ^b ; ^c ; Bei He^a ; ^b ; ^c ; Hua-Ming Wang^a ; ^b ; ^c
• 关键词：Novel titanium alloy ; Laser additive manufacturing ; Macrostructure ; Microstructure ; Room temperature tensile properties
• 刊名：Materials Science and Engineering: A
• 出版年：2017
• 出版时间：27 January 2017
• 年：2017
• 卷：684
• 期：Complete
• 页码：233-238
• 全文大小：2035 K
• 卷排序：684

文摘

A novel α+β titanium alloy with multi-alloying addition and low-cost is designed from Ti-6Al-4V. In order to maintain the same [Al]eq and [Mo]eq, the Mo and Zr were added into the alloy instead of V, and the nominal composition of this novel alloy is determined as Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si with a spot of Si added. In this study, a plate of the novel alloy was manufactured by laser additive manufacturing (LAM). The macrostructure, microstructure, compositions, microhardness and room temperature tensile properties of as-deposited alloy were investigated. The results show that the macrostructure of the novel alloy contains large columnar grains and small columnar grains. Compared to the reference alloy Ti-6Al-4V manufactured with the same process, the novel alloy had much finer basket-weave microstructure. This novel alloy, solid-solute with alloying elements Mo, Zr and Si, has higher microhardness and better combination of strength and plasticity compared to Ti-6Al-4V.