- 作者：Dipit Sahu ; MS ; David M. Holmes ; James S. Fitzsimmons ; BSc ; Andrew R. Thoreson ; MS ; Lawrence J. Berglund ; BS ; Kai-Nan An ; PhD ; Shawn W. O&rsquo ; Driscoll ; PhD ; MD ; odriscoll.shawn@mayo.edu" class="auth_mail
- 关键词：Basic Science Study ; Biomechanics
- 刊名：Journal of Shoulder and Elbow Surgery
- 出版年：April, 2014
- 年：2014
- 卷：23
- 期：4
- 页码：456-462
- 全文大小：568 K
Hypothesis
Our aim was to test whether anatomically designed metallic radial head implants could better reproduce native radiocapitellar contact pressure and areas than nonanatomic implants.Methods
The distal humerus and proximal radius from 6 cadaveric upper extremities were serially tested in supination with 100 N of compression force at 4 angles of flexion (0掳, 30掳, 60掳, and 90掳). By use of a thin flexible pressure transducer, contact pressures and areas were measured for the native radial head, an anatomic implant, a nonanatomic circular monopolar implant, and a bipolar nonanatomic implant. The data (mean contact pressure and mean contact area) were modeled using a 2-factor repeated-measures analysis of variance with P 鈮?.05 considered to be significant.
Results
The mean contact areas for the prosthetic radial heads were significantly less than those seen with the intact radial heads at every angle tested (P < .01). The mean contact pressures increased significantly with all prosthetic radial head types as compared with the native head. The mean contact pressures increased by 29% with the anatomic prosthesis, 230% with the monopolar prosthesis, and 220% with the bipolar prosthesis. Peak pressures of more than 5 MPa were more commonly observed with both the monopolar and bipolar prostheses than with the anatomic or native radial heads.
Conclusions
The geometry of radial head implants strongly influences their contact characteristics. In a direct radius-to-capitellum axial loading experiment, an anatomically designed radial head prosthesis had lower and more evenly distributed contact pressures than the nonanatomic implants that were tested.