Numerical simulations of a tanker collision with a bergy bit incorporating hydrodynamics, a validated ice model and damage to the vessel

详细信息    查看全文

• 作者：R.E. Gagnon ; ^{robert.gagnon@nrc.ca} ; J. Wang
• 关键词：Bergy bit collision ; Numerical simulation ; Ship damage
• 刊名：Cold Regions Science and Technology
• 出版年：2012
• 出版时间：September, 2012
• 年：2012
• 卷：81
• 期：Complete
• 页码：26-35
• 全文大小：2488 K

文摘

Numerical simulations of a collision between a loaded tanker and a bergy bit have been conducted using LS-Dyna?software. The simulations incorporated hydrodynamics, via LS-Dyna's ALE formulation, and a validated crushable foam ice model. The major portion of the vessel was treated as a rigid body and a section of the hull, located on the starboard side of the forward bow where the ice contact occurred, was modeled as typical ship grillage that could deform and sustain damage as a result of the collision. Strategies for dealing with the highly varying mesh densities needed for the simulations are discussed as well as load and pressure distribution on the grillage throughout the course of the collision. Realistic movement of the bergy bit due to the vessel's bow wave prior to contact with the ice was observed and the damage to the grillage resembled published results from actual grillage damage tests in the lab. A load measurement from the lab tests compared reasonably well with a rough estimate from the simulation. The collision eventually ruptured the hull in a ripping fashion resembling documented incidents of vessel impacts with ice masses.