Hydrogen production by sorption enhanced steam reforming of oxygenated hydrocarbons (ethanol, glycerol, n-butanol and methanol): Thermodynamic modelling

详细信息    查看全文

• 作者：Aline Lima da Silva ; ^a ; ^{adasilva26@gmail.com} ; Iduvirges Lourdes Mü ; ller^a
• 关键词：Biofuels ; Steam reforming ; Sorption enhanced ; Hydrogen production ; Gibbs energy minimization method ; Fuel Cells
• 刊名：International Journal of Hydrogen Energy
• 出版年：2011
• 出版时间：February 2011
• 年：2011
• 卷：36
• 期：3
• 页码：2057-2075
• 全文大小：3652 K

文摘

Thermodynamic analysis of steam reforming of different oxygenated hydrocarbons (ethanol, glycerol, n-butanol and methanol) with and without CaO as CO₂ sorbent is carried out to determine favorable operating conditions to produce high-quality H₂ gas. The results indicate that the sorption enhanced steam reforming (SESR) is a fuel flexible and effective process to produce high-purity H₂ with low contents of CO, CO₂ and CH₄ in the temperature range of 723–873 K. In addition, the separation of CO₂ from the gas phase greatly inhibits carbon deposition at low and moderate temperatures. For all the oxygenated hydrocarbons investigated in this work, thermodynamic predictions indicate that high-purity hydrogen with CO content within 20 ppm required for proton exchange membrane fuel cell (PEMFC) applications can be directly produced by a single-step SESR process in the temperature range of 723–773 K at pressures of 3–5 atm. Thus, further processes involving water–gas shift (WGS) and preferential CO oxidation (COPROX) reactors are not necessary. In the case of ethanol and methanol, the theoretical findings of the present analysis are corroborated by experimental results from literature. In the other cases, the results could provide an indication of the starting point for experimental research. At P = 5 atm and T = 773 K, it is possible to obtain H₂ at concentrations over 97 mol % along with CO content around 10 ppm and a thermal efficiency greater than 76 % . In order to achieve such a reformate composition, the optimized steam-to-fuel molar ratios are 6:1, 9:1, 12:1 and 4:1 for ethanol, glycerol, n-butanol and methanol, respectively, with CaO in the stoichiometric ratio to carbon atom.