文摘
Three-dimensional models of amorphized zones beneath quasistatic and dynamic Vickers indentations on boron carbide were constructed using micro-Raman spectroscopy. The square of amorphized zone depth varied linearly with load and the maximum amorphized area occurred beneath the indentation imprint in accord with the maximum shear stress under Hertzian contact. Reduced measurements of amorphization intensity at loads above 10 N may be due to a loss of subsurface amorphized material through lateral cracks. Utilizing an expanding cavity model with power-law (n = 0.79–0.80) and linear (Ep = 0.39–0.45) strain hardening responses, finite element simulations were conducted to determine the critical values of stress and strain required to cause amorphization. These simulations suggest that amorphization may initiate at von Mises stresses and equivalent plastic strains above 6.6 GPa and 0.026, respectively. These results may be useful for validating computational models of boron carbide under complex loading scenarios (e.g., ballistic impact).