Selenite sorption by carbonate substituted apatite

详细信息    查看全文

• 作者：Robert C. Moore ; ^{rcmoore@sandia.gov" class="auth_mail" title="E-mail the corresponding author} ; Mark J. Rigali ^{mjrigal@sandia.gov" class="auth_mail" title="E-mail the corresponding author} ; Patrick Brady ^{pvbrady@sandia.gov" class="auth_mail" title="E-mail the corresponding author}
• 关键词：Selenium ; Selenite ; Carbonated apatite ; Apatite ; Sorption ; Kinetics
• 刊名：Environmental Pollution
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：218
• 期：Complete
• 页码：1102-1107
• 全文大小：723 K

文摘

The sorption of selenite, SeO₃²⁻, by carbonate substituted hydroxylapatite was investigated using batch kinetic and equilibrium experiments. The carbonate substituted hydroxylapatite was prepared by a precipitation method and characterized by SEM, XRD, FT-IR, TGA, BET and solubility measurements. The material is poorly crystalline, contains approximately 9.4% carbonate by weight and has a surface area of 210.2 m²/g. Uptake of selenite by the carbonated hydroxylapatite was approximately an order of magnitude higher than the uptake by uncarbonated hydroxylapatite reported in the literature. Distribution coefficients, K_d, determined for the carbonated apatite in this work ranged from approximately 4200 to over 14,000 L/kg. A comparison of the results from kinetic experiments performed in this work and literature kinetic data indicates the carbonated apatite synthesized in this study sorbed selenite 23 times faster than uncarbonated hydroxylapatite based on values normalized to the surface area of each material. The results indicate carbonated apatite is a potential candidate for use as a sorbent for pump-and-treat technologies, soil amendments or for use in permeable reactive barriers for the remediation of selenium contaminated sediments and groundwaters.