Investigating the Stability of Ru-promoted Fe-based Fischer-tropsch Catalyst at high Synthesis Gas Conversion

详细信息    查看全文

• 作者：Ian Fraser^a ; Ademola M. Rabiu^a ; ^{RabiuA@cput.ac.za} ; Eric van Steen^b
• 关键词：Fischer-Tropsch ; CO conversion ; Synthesis gas ; Iron-based FT catalyst ; Ruthenium ; Single pass ; Tail gas ; Slurry Reactor.
• 刊名：Energy Procedia
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：100
• 期：Complete
• 页码：210-216
• 全文大小：384 K
• 卷排序：100

文摘

The productivity of an iron-based Fischer Tropsch (FT) process strongly depends on the synthesis gas conversion. However, iron is known to oxidize significantly at high CO conversion due to the high reactor water partial pressures. In commercial iron-based FT plant this necessitate operation at low single pass conversion, resulting in high separation and recycling cost of the tail gas and the overall economics of the process. Ruthenium has been reported to demonstrate significant stability in the presence of water, hence the employment of FT catalyst promoted with Ru is expected to permit high CO conversion. In this study the stability of an industrial Fe-based FT catalyst impregnated with ruthenium is investigated. The reactions were carried out at industrially relevant conditions in a 1 dm3 slurry reactor at 250 °C and 20 bar. It was noted that the Fe promoted with Ru was more stable at high CO conversion implying a significant resistance to deactivation in the presence of water. An increase in CO2 and CH4 selectivity and a fall in C5+ selectivity were also noted.