We analysed 633 dusky grouper larvae and juveniles (0.2–7.2 cm total length, TL), sampled during two larval rearing cycles carried out in 2001 and 2002 in Italy. The specimens at different development stages were stained in toto for bone and cartilage and examined for skeletal anomalies during dusky grouper ontogenesis. The incidence of anomalies in groupers hatched from the same egg batch but reared using two different methods (green waters and semi-intensive rearing) and three stocking densities (8, 16 and 28 larvae/l) was compared, with a view to providing tools for identifying the most appropriate larval rearing method in order to at least limit the onset of skeletal anomalies.
Our results suggest that during development no particular skeletal anomaly patterns (or fate) can be clearly identified as a high variability was observed in malformation typologies and the regions affected.
No significant differences in the morphological quality between groupers reared using semi-intensive (LV02 lot) and green water (GW02-01 lot) methodologies were observed, whilst groupers reared at the highest stocking density (28 larvae/l) showed the highest frequency of deformed individuals (75.8 % ), the highest malformation charge (average of 5.5 anomalies per deformed individual), the largest range of anomaly typologies (38), and the highest incidence of individuals with at least one severe anomaly (30.9 % ). Whilst in green waters no evident effects of larvae density were observed on survival rates, the survival rate in large volume reared individuals (17.5 % ) was considerably higher with respect to those reared in green waters (0.2 % ) at 7–8 larvae/l. This indicates that the semi-intensive methodology should be considered more effective in enhancing the survival rate of dusky grouper larvae.