A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test

详细信息    查看全文

• 作者：M. Pé ; rez-Galmé ; s^a ; ^{magdalena.perez@udg.edu" class="auth_mail" title="E-mail the corresponding author} ; J. Renart^a ; ^{jordi.renart@udg.edu" class="auth_mail" title="E-mail the corresponding author} ; C. Sarrado^a ; ^{carlos.sarrado@udg.edu" class="auth_mail" title="E-mail the corresponding author} ; A. Rodrí ; guez-Bellido^b ; ^{ana.rodriguez@airbus.com" class="auth_mail" title="E-mail the corresponding author} ; J. Costa^a ; ^{josep.costa@udg.edu" class="auth_mail" title="E-mail the corresponding author}
• 关键词：B. Fracture toughness ; B. Delamination ; D. Mechanical testing ; J-integral
• 刊名：Composites Part A: Applied Science and Manufacturing
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：90
• 期：Complete
• 页码：670-677
• 全文大小：1117 K

文摘

Various difficulties arise in the data reduction of the end-loaded split (ELS) test. On one hand, a small Fracture Process Zone (FPZ) at the crack front is assumed in the existing mode II end-loaded split test methodologies based on Linear Elastic Fracture Mechanics (LEFM). However, mode II fracture has been reported to involve large FPZ and a fuzzy crack tip. Furthermore, the ELS test, is usually affected by geometrical non-linearities.

This work proposes a closed-form solution based on the J-integral to determine the interlaminar fracture toughness in an ELS test. This solution avoids the need to measure the crack length, and is applicable when a large FPZ is present, as occurs in adhesive bonded joints between CFRP. In addition, because the ELS test involves large vertical deflections, a correction of the formulation for large displacements has been implemented.

This new methodology has been compared to other methods available in the literature based on LEFM by means of an experimental campaign of delamination tests using unidirectional CFRP specimens in order to make a first validation of the method.