Sliding wear resistance of tempered D6ac steel

详细信息    查看全文

• 作者：Shyh-Chi Wu ; Hua-Chiang Wene ; Kuang-Hung Tseng ; Wei-Hung Yau ; Ming-Jhang Wu ; Chang-Pin Chou ; Wen-Kuang Hsu
• 关键词：Temper ; Friction ; Elongation ; Tribology
• 刊名：Vacuum
• 出版年：2013
• 出版时间：January, 2013
• 年：2013
• 卷：87
• 期：Complete
• 页码：89-94
• 全文大小：1600 K

文摘

The aim of this study was to determine the sliding wear resistance of D6ac (tempered at room temperature, 450, or 550 ¡ãC) and to perform tribological responds. The obtained microstructures exhibited a heavy number of misfit dislocations from work hardening of the parent material, with the degree of disorder dislocation decreasing gradually upon increasing the temperature from 450 to 550 ¡ãC. XRD spectra observed that the residual austenite and/or mixed structures of ferrite with the precipitation of carbides at 550 ¡ãC will result in a softer state than that of the room temperature specimen. The elevated temperature affected the tribological behavior and induced in the parent material a significant surface response failure. The lateral force increased gradually up to 50 ¦ÌN in the tempered cases, due to the enhanced toughness. We suggest that the increase in the coefficients of friction upon increasing the tempering temperature from 450 to 550 ¡ãC resulted due to a soft ferrite phase. Slightly stable fluctuations of the values of ¦Ì appeared for the surfaces scratched at a constant load; therefore, plastic deformation occurred along the wear path. For the measured results of the D6ac from room temperature to 550 ¡ãC, the coefficient of friction was 0.34 ¡À 0.05, 0.27 ¡À 0.04, and 0.13 ¡À 0.02, respectively. The experimental result also can be evidenced from tribological stressing and mechanical behavior.