Ignition of high pressure lean H₂:air mixtures along the multiple channels of nanosecond surface discharge

详细信息    查看全文

• 作者：Sergey A. Shcherbanev ; ^a ; ^{sergey.shcherbanev@lpp.polytechnique.fr} ; Nikolay A. Popov^b ; Svetlana M. Starikovskaia^a ; ^{svetlana.starikovskaya@lpp.polytechnique.fr}
• 关键词：Plasma-assisted combustion ; Nanosecond surface dielectric barrier discharge ; Ignition of lean mixtures
• 刊名：Combustion and Flame
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：176
• 期：Complete
• 页码：272-284
• 全文大小：4712 K
• 卷排序：176

文摘

The initiation of combustion of lean H2:air mixtures, ER=0.5--0.6,ER=0.5--0.6, by nanosecond surface dielectric barrier discharge (nSDBD) was studied experimentally at high initial pressures, P=3--6P=3--6 bar. The discharge was studied in different gas mixtures for the pressure range 1–12 bar. The ignition was initiated by two different discharge modes: streamer or filamentary nSDBD. The influence of the discharge structure and energy deposition on the ignition was demonstrated. Three regimes of multi-point ignition were observed: ignition with a few kernels, quasi-uniform ignition along the edge of the high voltage electrode and ignition along the plasma channels. The velocities of flame propagation were analyzed. The minimum ignition energy of the discharge and ignition delay time of combustion have been measured and analyzed with the help of kinetic numerical modeling.