Adsorption mechanism of Cu(II) ions from aqueous solution by glutaraldehyde crosslinked humic acid-immobilized sodium alginate porous membrane adsorbent

详细信息    查看全文

• 作者：Jian Hua  ; Chen^a ;   ; ^{jhchen73@126.com} ; Qing Lin  ; Liu^b ; Shi Rong  ; Hu^a ; Jian Cong  ; Ni^a ; Ya Shan  ; He^a
• 关键词：Humic acid ; Sodium alginate ; Membrane ; Adsorption mechanism ; Cu(II)
• 刊名：Chemical Engineering Journal
• 出版年：2011
• 出版时间：15 September 2011
• 年：2011
• 卷：173
• 期：2
• 页码：511-519
• 全文大小：883 K

文摘

A novel porous composite membrane adsorbent GA-HA/SA was prepared by glutaraldehyde (GA) crosslinked humic acid (HA) immobilized sodium alginate (SA) and used to remove Cu(II) ions from wastewater. Compared with traditional centrifugation or filtration methods for separating adsorbent from solution, the Cu-HA/SA can be used more conveniently. The physico-chemical properties of GA-HA/SA before and after adsorption were investigated by FT-IR, SEM and EDX methods. To investigate the effects of experimental parameters on adsorption behavior, a batch of experiments were performed by changing the concentration of porogen polyethylene glycol in the GA-HA/SA, solution pH, ionic strength, initial Cu(II) ions concentration and contact time. The GA-HA/SA showed the maximum uptake of 63.1 mg/g under the optimal adsorption condition. Based on adsorption experiment, it can be found that uptake capacity of the GA-HA/SA for Cu(II) ions decreased with an increasing of ionic strength, and solution pH decreased until the adsorption equilibrium. Kinetics experiments indicated the pseudo-second-order model displayed the best correlation with adsorption kinetics data. The Crank model showed that the intraparticle solute diffusion is the rate-controlling adsorption step. Besides, adsorption experimental data could be better described by the Freundlich isotherm model.