Intraosseous generation of heat during guided surgical drilling: an ex vivo study of the effect of the temperature of the irrigating fluid

详细信息    查看全文

• 作者：Kristof Boa^a ; ^{boa.kristof@gmail.com" class="auth_mail" title="E-mail the corresponding author} ; Ibrahim Barrak^b ; ¹ ; ^{barrakibrahim@gmail.com" class="auth_mail" title="E-mail the corresponding author} ; Endre Varga Jr^d ; Arpad Joob-Fancsaly^c ; Endre Varga^a ; Jozsef Piffko^b
• 关键词：Irrigation fluid ; Implants ; Guided surgery ; Drilling guide ; Temperature ; Bone drilling
• 刊名：British Journal of Oral and Maxillofacial Surgery
• 出版年：2016
• 出版时间：October 2016
• 年：2016
• 卷：54
• 期：8
• 页码：904-908
• 全文大小：760 K

文摘

We measured the rise in the intraosseous temperature caused by freehand drilling or drilling through a surgical guide, by comparing different temperatures of irrigation fluid (10 °C, 15 °C, and 20 °C), for every step of the drilling sequence (diameters 2.0, 2.5, 3.0, and 3.5 mm) and using a constant drilling speed of 1200 rpm. The axial load was controlled at 2.0 kg. Bovine ribs were used as test models. In the guided group we used 3-dimensional printed surgical guides and temperature was measured with a thermocouple. The significance of differences was assessed with the Kruskal-Wallis analysis of variance. Guided drilling with 10 °C irrigation yielded a significantly lower increment in temperature than the 20 °C-guided group. When compared with the 20 °C freehand group, the reduction in temperature in the 10 °C guided group was significantly more pronounced at all diameters except 3.5 mm. Finally, when the 10 °C-guided group was compared with the 15 °C groups, the temperature rise was significantly less at 2.5 and 3.0 mm than with the guided technique, and at 3.0 mm compared with the freehand technique. We suggest that the use of 10 °C pre-cooled irrigation fluid is superior to warmer fluid for keeping temperature down, and this reduces the difference between guided and freehand drilling.