Butadiene production process overview

详细信息    查看全文

• 作者：Wm. Claude White
• 关键词：Butadiene ; Steam cracking ; Extractive distillation ; Styrene– ; butadiene rubber ; Polybutadiene
• 刊名：Chemico-Biological Interactions
• 出版年：2007
• 出版时间：20 March 2007
• 年：2007
• 卷：166
• 期：1-3
• 页码：10-14
• 全文大小：159 K

文摘

Over 95 % of butadiene is produced as a by-product of ethylene production from steam crackers. The crude C4 stream isolated from the steam cracking process is fed to butadiene extraction units, where butadiene is separated from the other C4s by extractive distillation. The amount of crude C4s produced in steam cracking is dependent on the composition of the feed to the cracking unit. Heavier feeds, such as naphtha, yield higher amounts of C4s and butadiene than do lighter feeds. Crackers using light feeds typically produce low quantities of C4s and do not have butadiene extraction units. Overall butadiene capacity is determined by ethylene cracker operating rates, the type of feed being cracked, and availability of butadiene extraction capacity. Global butadiene capacity is approximately 10.5 million metric tons, and global production is approximately 9 million metric tons [Chemical Marketing Associates, Inc. (CMAI), 2005 World Butadiene Analysis, Chemical Marketing Associates, Inc. (CMAI), 2005]. Crude C4s are traded globally, with the United States being the only significant net importer. Finished butadiene is also traded globally, with the largest exporters being Canada, Western Europe, Saudi Arabia and Korea. The largest net importers are Mexico, the United States and China.

The global demand for butadiene is approximately 9 million metric tons [Chemical Marketing Associates, Inc. (CMAI), 2005 World Butadiene Analysis, Chemical Marketing Associates, Inc. (CMAI), 2005]. Production of styrene–butadiene rubber and polybutadiene rubber accounts for about 54 % of global butadiene demand, with tire production being the single most important end use of butadiene synthetic rubbers. Other major butadiene derivatives are acrylonitrile–butadiene–styrene (ABS) and styrene butadiene latex (about 24 % of demand combined).