Comparison of plantar loads during treadmill and overground running

详细信息    查看全文

• 作者：Youlian Hong^a ; ^b ; ¹ ; Lin Wang^c ; ^d ; ² ; Jing Xian Li^c ; ^e ; ¹ ; ^{jli@uottawa.ca} ; Ji He Zhou^a ; ¹
• 关键词：Biomechanics ; Running ; Athletic injuries ; Exercise test ; Running surfaces ; Plantar load
• 刊名：Journal of Science and Medicine in Sport
• 出版年：2012
• 出版时间：November, 2012
• 年：2012
• 卷：15
• 期：6
• 页码：554-560
• 全文大小：250 K

文摘

Objectives

The objective of this study is to compare plantar loads during treadmill running and running on concrete and grass surfaces.

Design

Crossover study design was used in the study.

Methods

A total of 16 experienced heel-to-toe runners participated in the study. Plantar loads data were collected using a Novel Pedar insole sensor system during running on the treadmill, concrete, and grass surfaces at 3.8 m/s running speed and then analyzed.

Results

Compared with running on the two other surfaces, treadmill running showed a lower magnitude of maximum plantar pressure and maximum plantar force for the total foot, maximum plantar pressure at two toe regions, and maximum plantar force for the medial forefoot region and two toe regions (p < 0.0017). Treadmill running also showed a longer absolute contact time at two toe regions compared with running on the other two surfaces (p < 0.0017).

Conclusions

Treadmill running is associated with a lower magnitude of maximum plantar pressure and a lower maximum plantar force at the plantar areas. These results suggest that the plantar load distribution in treadmill running is not the same as the plantar load distribution in running on overground surfaces. Treadmill running may be useful in early rehabilitation programs. Patients with injuries in their lower extremities may benefit from the reduction in plantar loads. However, the translation to overground running needs investigation.