Elucidating the Rheological Effect of Gel Abrasives in Magnetic Abrasive Finishing

详细信息    查看全文

• 作者：Shih-Hsien Chou^a ; A-Cheng Wang^a ; ^{acwang@uch.edu.tw" class="auth_mail" title="E-mail the corresponding author} ; Yan-Cherng Lin^b
• 关键词：Rheological effect ; magnetic abrasive finishing ; gel abrasive ; toy clay
• 刊名：Procedia CIRP
• 出版年：2016
• 出版时间：2016
• 年：2016
• 卷：42
• 期：Complete
• 页码：866-871
• 全文大小：268 K

文摘

Toy clays made by bean gums or silicone gels can not only deform easily but also attach the undulate surface very closely. Flexible grinding tool can be produced to polish the un-flat surface by using above clays as abrasive media. Therefore, novel gel abrasives with permeability were developed to carry out magnetic abrasive finishing (MAF). In this study, bean gums or silicone gel with different viscosities were binding the steel grit and silicon carbon as gel abrasive with permeability. Magnetic finishing with gel abrasive (MFGA) was utilized in this study to polish the cylindrical rod of mold steel; furthermore, this cylindrical rod was fixed in a horizontal chuck that could rotate and vibrate in the axial direction. This study focused on the finishing efficiencies and the surface roughness of the workpieces after MFGA. Moreover, recycling times of gel abrasive were also the main effects that need to be approved. The results demonstrated that gel abrasive made by silicone gel with high viscosity would flowed away from the working area by centrifugal forces from rotating rod, inducing unstable efficiency in MFGA. However, gel abrasive produced by bean gum could resist centrifugal force and fixed in the working area, providing excellent polishing effect; therefore, surface roughness of cylindrical rod reduced from 0.65 μmRa to 0.09 μmRa within 5 minutes. Roughness improvement rate still remained at a high level of 90% when silicone gel with low viscosity (35 grams) was used 8 times to finish 8 workpieces, therefore, this result proved that the gel abrasive had excellent ability of the recycling.