Experimental investigation and finite element simulation of laser beam welding induced residual stresses and distortions in thin sheets of AA 6056-T4

详细信息    查看全文

• 作者：Muhammad Zain-ul-abdein ; Daniel Né ; lias ; Jean-Franç ; ois Jullien ; Dominique Deloison
• 关键词：Laser beam welding ; Finite element simulation ; Residual stress ; Distortion
• 刊名：Materials Science and Engineering: A
• 出版年：2010
• 出版时间：15 May 2010
• 年：2010
• 卷：527
• 期：12
• 页码：3025-3039
• 全文大小：2492 K

文摘

Laser beam welding has recently found its application in the fabrication of aircraft structures where fuselage panels, made of thin sheets of AA 6056-T4 (an aluminium alloy), are welded with stiffeners of the same material in a T-joint configuration. The present work simulates laser beam welding induced residual stresses and distortions using industrially employed thermal and mechanical boundary conditions. Various measurements performed on small-scale welded test specimens provide a database of experimental results that serves as a benchmark for qualification of the simulation results. The welding simulation is performed with the commercial finite element software Abaqus and a Fortran programme encoding a conical heat source with Gaussian volumetric distribution of flux. A sequentially coupled temperature–displacement analysis is undertaken to simulate the weld pool geometry, transient temperature and displacement fields. The material is assumed to follow an elasto-plastic law with isotropic hardening behaviour (von Mises plasticity model). A comparison between the experimental and simulation results shows a good agreement. Finally, the residual stress and strain states in a T-joint are predicted.