Reduction of driving voltage in organic light-emitting diodes with molybdenum trioxide in CuPc/NPB interface

详细信息    查看全文

• 作者：Ye Zou ; Zhenbo Deng ; Zhaoyue Lv ; Zheng Chen ; Denghui Xu ; Yanli Chen ; Yuehong Yin ; Hailiang Du ; Yongsheng Wang
• 关键词：Organic light-emitting diodes ; Driving voltage ; Step barrier ; MoO₃
• 刊名：Journal of Luminescence
• 出版年：2010
• 出版时间：June 2010
• 年：2010
• 卷：130
• 期：6
• 页码：959-962
• 全文大小：252 K

文摘

A novel structure of organic light-emitting diode was fabricated by inserting a molybdenum trioxide (MoO₃) layer into the interface of hole injection layer copper phthalocyanine (CuPc) and hole transport layer N,N′-diphenyl-N,N′-bis(1-napthyl–phenyl)-1,1′-biphenyl-4,4′-diamine (NPB). It has the configuration of ITO/CuPc(10 nm)/MoO₃(3 nm)/NPB(30 nm)/ tris-(8-hydroxyquinoline) aluminum (Alq₃)(60 nm)/LiF(0.5 nm)/Al. The current density–voltage–luminance (J–V–L) performances show that this structure is beneficial to the reduction of driving voltage and the enhancement of luminance. The highest luminance increased by more than 40 % compared to the device without hole injection layer. And the driving voltage was decreased obviously. The improvement is ascribed to the step barrier theory, which comes from the tunnel theory. The power efficiency was also enhanced with this novel device structure. Finally, “hole-only” devices were fabricated to verify the enhancement of hole injection and transport properties of this structure.