A threaded-connection locking mechanism integrated into a multi-piece mining wheel for enhanced structural performance and safety

详细信息    查看全文

• 作者：Zhanbiao Li ; Sante DiCecco ; Aleks ; er Tonkovich ; William Altenhof ; Richard Banting ; Henry Hu
• 关键词：Multi-piece rim ; Safety ; Locking mechanism ; Threaded-connection ; FE modelling ; Engagement ; Stress ; Fatigue life
• 刊名：Journal of Terramechanics
• 出版年：2013
• 出版时间：August, 2013
• 年：2013
• 卷：50
• 期：4
• 页码：245-264
• 全文大小：4151 K

文摘

Multi-piece wheel components are used for off-the-road (OTR) mining wheels for the purpose of tire mounting. Incident report analyses indicate that the disengagement of the rim components in the locking region is a common cause of failure. This study proposes a threaded-connection locking mechanism to remove the conventional lock ring to enhance the engagement and improve the performance of the OTR wheel. Using validated finite element models, two numerical tests were conducted to evaluate the proposed design and the conventional design, namely, (1) a pull-out tests to evaluate the engagement capability of rim components and (2) quasi-static loading tests to assess stress levels and fatigue lives. The pull-out test results showed the proposed design was almost twice as strong as the conventional design in resisting the disengagement of the rim components and the mode of failure associated with the proposed design is less catastrophic. Under quasi-static loading conditions, the maximum effective stress was approximately 29 % lower and the average stress was much lower on the front section of the rim base for the proposed design. The estimated fatigue life for the proposed design was approximately three times greater than the conventional design.