文摘
A unified discretization of rigid solids and fluids is introduced, allowing for resolved simulations of fluid–solid phases within a meshless framework. The numerical solution, attained by Smoothed Particle Hydrodynamics (SPH) and a variation of Discrete Element Method (DEM), the Distributed Contact Discrete Element Method (DCDEM) discretization, is achieved by directly considering solid–solid and solid–fluid interactions. The novelty of the work is centred on the generalization of the coupling of the DEM and SPH methodologies for resolved simulations, allowing for state-of-the-art contact mechanics theories to be used in arbitrary geometries, while fluid to solid and vice versa momentum transfers are accurately described. The methods are introduced, analysed and discussed. Initial validations on the DCDEM and the fluid coupling are presented, drawing from test cases in the literature. An experimental campaign serves as a validation point for complex, large scale solid–fluid flows, where a set of blocks in several configurations is subjected to a dam-break wave. Blocks are tracked and positions are then compared between experimental data and the numerical solutions. A Particle Image Velocimetry (PIV) technique allows for the quantification of the flow field and direct comparison with numerical data. The results show that the model is accurate and is capable of treating highly complex interactions, such as transport of debris or hydrodynamic actions on structures, if relevant scales are reproduced.