Predicting the fraction of the mixing zone of a rolling bed in rotary kilns

详细信息    查看全文

• 作者：Xiao Yan Liu ; Eckehard Specht
• 关键词：Chemical reactors ; Particle Technology ; Granular materials ; Rotary kiln ; Rolling motion ; Mathematical modeling
• 刊名：Chemical Engineering Science
• 出版年：2010
• 出版时间：15 May 2010
• 年：2010
• 卷：65
• 期：10
• 页码：3059-3063
• 全文大小：587 K

文摘

The thermal efficiency of a rotary kiln is predominantly influenced by the amount of lateral mixing of the material bed. In this paper, the fraction of the mixing zone in the material bed is predicted for the rolling motion. For a given material, the fraction is found to depend only on three dimensionless variables—the ratio of the particle diameter to the kiln diameter, the Froude number and the filling degree. Experiments were carried out on a rotating cylinder with beans as testing material. The predicted results are in good agreement with the measurements with a maximal error of 12 % . The fraction of the mixing zone is then analyzed for industrial rotary kilns. Its value is found to increase approximately linearly with increasing Froude number and the dynamic angle of repose of the material. For all investigated cases, the fraction of the mixing zone lies in the range of 20–45 % . Results of this study can provide orientating values of the mixing zone fraction, which are needed to calculate the thermal efficiency of the rotary kiln.