Application of transient burning rate model of solid propellant in electrothermal-chemical launch simulation

详细信息    查看全文

• 作者：Yan-jie Ni ; Yong Jin ; Gang Wan ; Chun-xia Yang ; Hai-yuan Li ; ^{Li_haiyuan@163.com" class="auth_mail" title="E-mail the corresponding author} ; Bao-ming Li
• 关键词：Solid propellant ; Electrothermal-chemical launch ; 0D internal ballistic model ; Transient burning rate law
• 刊名：Defence Technology
• 出版年：2016
• 出版时间：April 2016
• 年：2016
• 卷：12
• 期：2
• 页码：81-85
• 全文大小：1652 K

文摘

A 30 mm electrothermal-chemical (ETC) gun experimental system is employed to research the burning rate characteristics of 4/7 high-nitrogen solid propellant. Enhanced gas generation rates (EGGR) of propellants during and after electrical discharges are verified in the experiments. A modified 0D internal ballistic model is established to simulate the ETC launch. According to the measured pressure and electrical parameters, a transient burning rate law including the influence of EGGR coefficient by electric power and pressure gradient (dp/dt) is added into the model. The EGGR coefficient of 4/7 high-nitrogen solid propellant is equal to 0.005 MW⁻¹. Both simulated breech pressure and projectile muzzle velocity accord with the experimental results well. Compared with Woodley's modified burning rate law, the breech pressure curves acquired by the transient burning rate law are more consistent with test results. Based on the parameters calculated in the model, the relationship among propellant burning rate, pressure gradient (dp/dt) and electric power is analyzed. Depending on the transient burning rate law and experimental data, the burning of solid propellant under the condition of plasma is described more accurately.