A numerical algorithm to evaluate the transient response for a synchronous scanning streak camera using a time-domain Baum-Liu-Tesche equation
详细信息 查看全文
- 作者：Chengquan Peia ; Jinshou Tianb ; Shengli Wua ; slwu@mail.xjtu.edu.cn" class="auth_mail" title="E-mail the corresponding author ; Jiai Hec ; Zhen Liua
- 关键词：Baum&ndash ; Liu&ndash ; Tesche equation ; Numerical method ; Scanning deflection plate ; Synchronous scanning streak camera ; Transient response
- 刊名：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- 出版年：2016
- 出版时间：1 October 2016
- 年：2016
- 卷：832
- 期：Complete
- 页码：8-14
- 全文大小：819 K
文摘
The transient response is of great influence on the electromagnetic compatibility of synchronous scanning streak cameras (SSSCs). In this paper we propose a numerical method to evaluate the transient response of the scanning deflection plate (SDP). First, we created a simplified circuit model for the SDP used in an SSSC, and then derived the Baum–Liu–Tesche (BLT) equation in the frequency domain. From the frequency-domain BLT equation, its transient counterpart was derived. These parameters, together with the transient-BLT equation, were used to compute the transient load voltage and load current, and then a novel numerical method to fulfill the continuity equation was used. Several numerical simulations were conducted to verify this proposed method. The computed results were then compared with transient responses obtained by a frequency-domain/fast Fourier transform (FFT) method, and the accordance was excellent for highly conducting cables. The benefit of deriving the BLT equation in the time domain is that it may be used with slight modifications to calculate the transient response and the error can be controlled by a computer program. The result showed that the transient voltage was up to 1000 V and the transient current was approximately 10 A, so some protective measures should be taken to improve the electromagnetic compatibility.