Plastic evolution behavior of H340LAD_Z steel by an optical method

详细信息    查看全文

• 作者：Nan Guo ; Jin Liang ; Qiang Yu ; Boxing Qian
• 关键词：Yield behavior ; Digital image correlation ; Evolution law ; Plastic
• 刊名：Physica B: Condensed Matter
• 出版年：2017
• 出版时间：1 February 2017
• 年：2017
• 卷：506
• 期：Complete
• 页码：69-74
• 全文大小：1523 K
• 卷排序：506

文摘

An optical method based on digital image correlation (DIC) technology was proposed to measure the plastic evolution of the high-strength low alloy steel H340LAD_Z. The basic principle of DIC technology is introduced, and then, the use of a 3D deformation measurement system and electronic universal testing machine to dynamically measure plastic evolution during the tensile yield stage is described. Through the full-field full-process measurement of plastic deformation during the yield stage in the 0°, 45° and 90° loading directions, the plastic evolution law was revealed. The results demonstrate that the proposed 3D DIC method can accurately reveal the starting and ending times for plastic evolution. The specimens in the three directions exhibit different plastic evolution behaviors, although they have similar yield strengths and yield times. The specimens in the 45° and 90° loading directions began to enter plastic deformation from bottom to top and the plastic area was maintained in a constant deformed state, while the evolution behavior in the 0° direction transited from both sides to the middle and plastic deformation was uneven. It is important to study plastic evolution of a metal sheet to determine the material properties and to provide an accurate basis for finite element modeling.