Effect of damage on failure mode of multi-bolt composite joints using failure envelope method

详细信息    查看全文

• 作者：Xiaoquan Cheng^a ; ^{xiaoquan_cheng@buaa.edu.cn} ; Songwei Wang^a ; Jie Zhang^a ; Wenjun Huang^b ; Yujia Cheng^a ; Jikui Zhang^a ; ^{zjk@buaa.edu.cn}
• 关键词：Damage ; Failure mode ; Multi-bolt joints ; Finite element analysis
• 刊名：Composite Structures
• 出版年：2017
• 出版时间：15 January 2017
• 年：2017
• 卷：160
• 期：Complete
• 页码：8-15
• 全文大小：1612 K
• 卷排序：160

文摘

Failure envelope method is comprehensively used in failure mode prediction of multi-bolt composite joints. The method is based on the assumption that bolt load distribution proportion is constant till failure. However, bearing damage and net-section damage must have some influence on the load distribution and then change structure failure mode. In this paper, tensile experiments of two-bolt and three-bolt joints were conducted to obtain the failure modes and other properties. Three dimensional (3D) finite element models involving damage were constructed, and the results were consistent with experimental data. Then, the models were used to study the effect of damage on failure mode of multi-bolt composite joints. The results show that failure mode prediction with failure envelope method should involve the effect of composite damage. Compared with net-section damage, bearing damage has greater influence on failure mode. Based on conventional failure envelope method, a new evaluation procedure involving damage was proposed.