Influence of dry grinding in a ball mill on the length of multiwalled carbon nanotubes and their dispersion and percolation behaviour in melt mixed polycarbonate composites

详细信息    查看全文

• 作者：Beate Krause^a ; Tobias Villmow^a ; Regine Boldt^a ; Mandy Mende^a ; Gudrun Petzold^a ; Petra P&#xf6 ; tschke ; ^a ; ^{poe@ipfdd.de"" rel=""nofollow}
• 关键词：A. Carbon nanotubes ; A. Polymer– ; matrix composites (PMCs) ; B. Electrical properties ; D. Transmission electron microscopy (TEM) ; Dispersion
• 刊名：Composites Science and Technology
• 出版年：2011
• 出版时间：31 May 2011
• 年：2011
• 卷：71
• 期：8
• 页码：1145-1153
• 全文大小：2386 K

文摘

Ball milling of carbon nanotubes (CNTs) in the dry state is a common way to produce tailored CNT materials for composite applications, especially to adjust nanotube lengths. For Nanocyl^TM NC7000 nanotube material before and after milling for 5 and 10 h the length distributions were quantified using TEM analysis, showing decreases of the mean length to 54 % and 35 % , respectively. With increasing ball milling time in addition a decrease of agglomerate size and an increase of packing density took place resulting in a worse dispersability in aqueous surfactant solutions. In melt mixed CNT/polycarbonate composites produced using masterbatch dilution step, the electrical properties, the nanotube length distribution after processing, and the nano- and macrodispersion of the nanotubes were studied. The slight increase in the electrical percolation threshold in the melt mixed composites with ball milling time of CNTs can be assigned to lower nanotube lengths as well as the worse dispersability of the ball milled nanotubes. After melt compounding, the mean CNT lengths were shortened to 31 % , 50 % , and 66 % of the initial lengths of NC7000, NC7000-5 h, and NC7000-10 h, respectively.