Determination of Mg, Ti and Cl in Ziegler-Natta catalysts by WDXRF
详细信息    查看全文
文摘
A method for determination of Mg, Ti and Cl in Ziegler-Natta (ZN) catalysts by wavelength dispersive X-ray fluorescence (WDXRF) spectrometry was developed. For comparative reasons, Ti was determined by spectrophotometry, Mg by complexometry and Cl by argentometric titration. Direct pressing was shown to be unsuitable for sample preparation due to catalyst decomposition. For Ti and Mg measurements, catalyst samples were calcinated at 1000°C and pressed at 275MPa. Their determination by the fundamental parameters based on the Ti Ka line measurement was shown to be equivalent to those results obtained by univariate calibration or by the classical methods. Cl was determined by aqueous extraction, followed by deposition on a support. Chloride loss was observed. Fixation of Cl as AgCl on polytetrafluoroethylene (FHLC) millipore membrane afforded the best results. Nevertheless, measurements by WDXRF were shown to be inferior to those obtained by argentometric titration.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700