Microfabrics in carbonate mylonites along a large-scale shear zone (Helvetic Alps)
详细信息 查看全文
- 作者：Andreas Ebert ; Marco Herwegh ; Brian Evans ; Adrian Pfiffner ; Nick Austin ; Torsten Vennemann
- 关键词：Calcite ; Second phases ; Microstructure ; Morcles nappe
- 刊名：Tectonophysics
- 出版年：2007
- 出版时间：1 November 2007
- 年：2007
- 卷：444
- 期：1-4
- 页码：1-26
- 全文大小：3698 K
文摘
Carbonate mylonites with varying proportions of second-phase minerals were collected at positions of increasing metamorphic grade along the basal thrust of the Morcles nappe (Helvetic nappes, Switzerland). Variations of temperature, stress, and strain rate, changes in chemistry of solid and fluid phases, and differing degrees of strain localization and annealing were tracked by measuring the shapes, mean sizes, and size distributions of both matrix and second-phase grains, as well as crystal preferred orientation (CPO) of the matrix. Field structures suggest that strain rate was constant along the fault. The mean and distribution of the calcite grain sizes were affected most profoundly by temperature: Increased temperature, presumably accompanied by decreased stress, correlated with larger mean sizes and wider size distributions. At a given location, the matrix grains in mylonites with more second-phase particles are, on average, smaller, have narrower size distributions, and have more elongate shapes. For example, mylonites with 50 vol. % of second phases have matrix grain sizes half that of pure mylonites. Changes in calcite chemistry and the presence of synkinematic fluids seemed to influence microfabric only weakly. Temporal variations in conditions, such as exhumation-induced cooling, apparently provoke changes in temperature, stress, and strain rate along the nappe. These changes result in further strain localization during retrograde conditions and cause the grain size to be reduced by an additional 50 % . The matrix CPO strengthens with increasing temperature or strain, but weakens and rotates with increasing second-phase content. These fabric changes suggest differing rates of grain growth, grain size reduction, and development of CPO owing to variations in the deformation conditions and, perhaps, mechanisms. To interpret natural mylonite structures or to extrapolate mechanical data to natural situations requires careful characterization of the microfabric, and, in particular, second-phase minerals.