Practical issues regarding angular and energy response in in vivo intraoperative electron radiotherapy dosimetry

详细信息    查看全文

• 作者：Juan Ló ; pez-Tarjuelo^a ; ^{lopez_juatar@gva.es} ; Ana Bouché ; -Babiloni^b ; Virginia Morillo-Mací ; as^b ; Agustí ; n Santos-Serra^a ; Carlos Ferrer-Albiach^b
• 关键词：ANOVA ; analysis of variance ; CF ; calibration factor ; GH ; Games&ndash ; Howell test ; IOERT ; intraoperative electron radiotherapy ; MOSFET ; metal oxide semiconductor field effect transistor ; T ; Tukey's test
• 刊名：Reports of Practical Oncology & Radiotherapy
• 出版年：2017
• 出版时间：January-February 2017
• 年：2017
• 卷：22
• 期：1
• 页码：29-36
• 全文大小：933 K
• 卷排序：22

文摘

To estimate angular response deviation of MOSFETs in the realm of intraoperative electron radiotherapy (IOERT), review their energy dependence, and propose unambiguous names for detector rotations.BackgroundMOSFETs have been used in IOERT. Movement of the detector, namely rotations, can spoil results.Materials and methodsWe propose yaw, pitch, and roll to name the three possible rotations in space, as these unequivocally name aircraft rotations. Reinforced mobile MOSFETs (model TN-502RDM-H) and an Elekta Precise linear accelerator were used. Two detectors were placed in air for the angular response study and the whole set of five detectors was calibrated as usual to evaluate energy dependence.ResultsThe maximum readout was obtained with a roll of 90° and 4 MeV. With regard to pitch movement, a substantial drop in readout was achieved at 90°. Significant overresponse was measured at 315° with 4 MeV and at 45° with 15 MeV. Energy response is not different for the following groups of energies: 4, 6, and 9 MeV; and 12 MeV, 15 MeV, and 18 MeV.ConclusionsOur proposal to name MOSFET rotations solves the problem of defining sensor orientations. Angular response could explain lower than expected results when the tip of the detector is lifted due to inadvertent movements. MOSFETs energy response is independent of several energies and differs by a maximum of 3.4% when dependent. This can limit dosimetry errors and makes it possible to calibrate the detectors only once for each group of energies, which saves time and optimizes lifespan of MOSFETs.