Effects of neutron irradiation of Ti₃SiC₂ and Ti₃AlC₂ in the 121-1085 °C temperature range

详细信息    查看全文

• 作者：Darin J. Tallman^a ; Lingfeng He^b ; Jian Gan^b ; El'ad N. Caspi^a ; ^c ; Elizabeth N. Hoffman^d ; Michel W. Barsoum^a ; ^{barsoumw@drexel.edu}
• 关键词：Ti3SiC2 ; Ti3AlC2 ; MAX phases ; Neutron irradiation ; Dislocation loops
• 刊名：Journal of Nuclear Materials
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：484
• 期：Complete
• 页码：120-134
• 全文大小：5739 K
• 卷排序：484

文摘

Herein we report on the formation of defects in response to neutron irradiation of polycrystalline Ti3SiC2 and Ti3AlC2 samples exposed to total fluences of ≈6 × 1020 n/m2, 5 × 1021 n/m2 and 1.7 × 1022 n/m2 at irradiation temperatures of 121(12), 735(6) and 1085(68)°C. These fluences correspond to 0.14, 1.6 and 3.4 dpa, respectively. After irradiation to 0.14 dpa at 121 °C and 735 °C, black spots are observed via transmission electron microscopy in both Ti3SiC2 and Ti3AlC2. After irradiation to 1.6 and 3.4 dpa at 735 °C, basal dislocation loops, with a Burgers vector of b = ½ [0001] are observed in Ti3SiC2, with loop diameters of 21(6) and 30(8) nm after 1.6 dpa and 3.4 dpa, respectively. In Ti3AlC2, larger dislocation loops, 75(34) nm in diameter are observed after 3.4 dpa at 735 °C, in addition to stacking faults. Impurity particles of TiC, as well as stacking fault TiC platelets in the MAX phases, are seen to form extensive dislocation loops under all conditions. Cavities were observed at grain boundaries and within stacking faults after 3.4 dpa irradiation, with extensive cavity formation in the TiC regions at 1085 °C. Remarkably, denuded zones on the order of 1 μm are observed in Ti3SiC2 after irradiation to 3.4 dpa at 735 °C. Small grains, 3–5 μm in diameter, are damage free after irradiation at 1085 °C at this dose. The results shown herein confirm once again that the presence of the A-layers in the MAX phases considerably enhance their irradiation tolerance. Based on these results, and up to 3.4 dpa, Ti3SiC2 remains a promising candidate for high temperature nuclear applications as long as the temperature remains >700 °C.