Effect of ultrasound application during setting on the mechanical properties of high viscous glass-ionomers used for ART restorations
详细信息 查看全文
- 作者：Lamia E. Daifalla ; Enas H. Mobarak ; enasmobarak@hotmail.com" class="auth_mail" title="E-mail the corresponding author
- 关键词：High viscous glass-ionomer restorative materials ; Ultrasound ; Microhardness ; Surface hardness ; Diametral tensile strength ; Time
- 刊名：Journal of Advanced Research
- 出版年：2015
- 出版时间：November 2015
- 年：2015
- 卷：6
- 期：6
- 页码：805-810
- 全文大小：691 K
文摘
This study was conducted to evaluate the effect of ultrasound application on the surface microhardness (VHN) and diametral tensile strength (DTS) of three high viscous glass-ionomer restorative materials (HVGIRMs). For each test (VHN and DTS), a total of 180 specimens were prepared from three HVGIRMs (Ketac-Molar Aplicap, Fuji IX GP Fast, and ChemFil Rock). Specimens of each material (n = 60) were further subdivided into three subgroups (n = 20) according to the setting modality whether ultrasound (20 or 40 s) was applied during setting or not (control). Specimens within each subgroup were then equally divided (n = 10) and tested at 24 h or 28 days. For the VHN measurement, five indentations, with a 200 g load and a dwell time for 20 s, were made on the top surface of each specimen. The DTS test was done using Lloyd Testing machine at a cross-head speed of 0.5 mm/min. Ultrasound application had no significant effect on the VHN. Fuji IX GP Fast revealed the highest VHN value, followed by Ketac-Molar Aplicap, and the least was recorded for ChemFil Rock. Fuji IX GP Fast and Ketac-Molar Aplicap VHN values were significantly increased by time. ChemFil Rock recorded the highest DTS value at 24 h and was the only material that showed significant improvement with both US application times. However, this improvement did not sustain till 28 days. The ultrasound did not enhance the surface microhardness, but its positive effect on the diametral tensile strength values was material and time dependent.