A multi-chamber model of combustion instabilities and its assessment using kilohertz laser diagnostics in a gas turbine model combustor

详细信息    查看全文

• 作者：YunTao Chen ; ^{yuntaoc@umich.edu" class="auth_mail" title="E-mail the corresponding author} ; James F. Driscoll
• 关键词：Combustion instability ; Reduced-oder modeling ; Gas turbine combustion ; Partially premixed combustion
• 刊名：Combustion and Flame
• 出版年：2016
• 出版时间：December 2016
• 年：2016
• 卷：174
• 期：Complete
• 页码：120-137
• 全文大小：2067 K

文摘

A multi-chamber model for the combustion instabilities manifested in a gas turbine model combustor was developed. The proposed model was used to explain the dependencies of instability frequency on burner geometry and other flow parameters, some of which could not be reconciled with previous models. The new model was built upon the Helmholtz analysis of two connected resonators. The instability frequency as well as the complex pressure ratio between two chambers were predicted by solving ordinary differential equations. To assess the assumptions and predictions of the proposed model, the spectra and magnitude of the oscillations of pressure, heat release rate, and velocity were measured for four different operating conditions: rich (R1), lean (L1), stoichiometric (S1), and reduced flow rate (R2) with a kilohertz laser diagnostic system. These measurements reconfirmed that the instability is of Helmholtz type. A global equivalence ratio that is consistently greater than unity was identified to be an enabling factor for combustion instability. This is also in agreement with the predictions made by the proposed model. Furthermore, the model was shown to be able to predict the right trend of instability frequency when multiple parameters were changed. It is concluded that the current model is an improvement over previous models, because the acoustic coupling between different chambers of the burner was considered.