Chemical redox recovery of giant, small-gap and other fullerenes

详细信息    查看全文

• 作者：James W. Raebiger ; John M. Alford ; Robert D. Bolskar ; Michael D. Diener
• 刊名：Carbon
• 出版年：2011
• 出版时间：January 2011
• 年：2011
• 卷：49
• 期：1
• 页码：37-46
• 全文大小：749 K

文摘

A simple method for extracting otherwise insoluble fullerenes into organic solvents is presented. The fullerenes are reduced to anionic charge states by contact with zinc in the presence of an alkylphosphonium salt in tetrahydrofuran. The anionic fullerenes become soluble, and the non-fullerene carbon matrix is separated by filtration. The anionic fullerenes can then be precipitated from solution by the action of a chemical oxidant such as iodine. It is also shown that there are approximately as many fullerenes left behind in carbon arc soot after solvent extraction as are extracted by the solvent. In contrast, more than twice as many fullerenes are left behind in combustion-produced fullerene soot as are solvent-extracted. Thus, approximately 70 % of the total recovered carbon product from large-scale combustion synthesis is fullerenes. Conversely, no detectable amount of fullerenes can be recovered from conventional carbon blacks under the same conditions. Analysis by single photon ionization mass spectrometry suggests that C₆₀ and C₇₀ account for almost half of the fullerenes that were not solvent-extractable, suggesting that they are readily incorporated into toluene-insoluble fullerene polymers. The redox process presented here is easily up-scaled, and we routinely recover 100 g of heretofore insoluble fullerenes in 8 h.