Laser patterned platform with PEDOT-graphene composite film for NO₂ sensing

详细信息    查看全文

• 作者：Katarzyna Dunst^a ; ^{dunstkatarzyna@gmail.com" class="auth_mail" title="E-mail the corresponding author} ; ^{katarzyna.dunst@pg.gda.pl" class="auth_mail" title="E-mail the corresponding author}Author Vitae ; Dominik Jurk&oacute ; w^bAuthor Vitae ; Piotr Jasiński^a ; ^{pijas@eti.pg.gda.pl" class="auth_mail" title="E-mail the corresponding author}Author Vitae
• 关键词：Numerical model ; Platform ; Gas ; Sensor ; Laser patterning
• 刊名：Sensors & Actuators: B. Chemical
• 出版年：2016
• 出版时间：28 June 2016
• 年：2016
• 卷：229
• 期：Complete
• 页码：155-165
• 全文大小：2602 K

文摘

This work presents a simple and fully electrochemical route used for fabricating of a NO₂ gas sensor made of reduced-graphene-oxide-poly(3,4-ethylenedioxythiophene) composite film. The sensing platform was fabricated from alumina substrate and equipped with gold interdigitated electrodes and built-in heater. The temperature distribution on the surface of interdigitated electrodes was investigated by a thermal imaging camera and compared with numerical simulations. The sensing film was prepared on sensing platform by electropolymerization of EDOT monomer and graphene oxide solution and reduction in 0.1 M KCl. A scanning electron microscopy and Raman spectroscopy of the sensing film were performed. Gas sensing measurements were carried out at elevated temperatures. The effects of the operating and annealing temperature of the gas sensing film to NO₂ on the sensing performance were investigated. The response characteristics in NO₂ at elevated temperatures in a tube furnace and using a built-in heater were compared. The effect of the flow rate and relative humidity was also investigated.