Yaw controller design of stratospheric airship based on phase plane method

详细信息    查看全文

• 作者：Jinggang Miao^a ; ^b ; ^{miaojg@aoe.ac.cn" class="auth_mail" title="E-mail the corresponding author}Author Vitae ; Jianghua Zhou^aAuthor Vitae ; Ying Nie^aAuthor Vitae ; Xin Yang^aAuthor Vitae
• 关键词：Attitude control ; Dynamics modeling ; Optimal control ; Phase plane method ; Stratospheric airship
• 刊名：Chinese Journal of Aeronautics
• 出版年：2016
• 出版时间：June 2016
• 年：2016
• 卷：29
• 期：3
• 页码：738-745
• 全文大小：1288 K

文摘

Recently, stratospheric airships prefer to employ a vectored tail rotor or differential main propellers for the yaw control, rather than the control surfaces like common low-altitude airship. The load capacity of vectored mechanism and propellers are always limited by the weight and strength, which bring challenges for the attitude controller. In this paper, the yaw channel of airship dynamics is firstly rewritten as a simplified two-order dynamics equation and the dynamic characteristics is analyzed with a phase plane method. Analysis shows that when ignoring damping, the yaw control channel is available to the minimum principle of Pontryagin for optimal control, which can obtain a Bang–Bang controller. But under this controller, the control output could be bouncing around the theoretical switch curve due to the presence of disturbance and damping, which makes adverse effects for the servo structure. Considering the structure requirements of actuators, a phase plane method controller is employed, with a dead zone surrounded by several phase switch curve. Thus, the controller outputs are limited to finite values. Finally, through the numerical simulation and actual flight experiment, the method is proved to be effective.