In anesthetized dogs, a stable occlusive thrombus was formed by mechanical and electrolytic injury of the vessel wall, that the animals were later injected with miniplasmin (0.75 mg/kg, 1.5 mg/kg and 3.0 mg/kg, i.a.) and rt-PA (0.5 mg/kg, i.a.) intra-arterially. Hemodynamic parameters and hemorrhage status were monitored for 2 h. Thrombin time, activated partial thromboplastin time, prothrombin time and fibrinogen concentration were tested at 2 h after administration. Fibrin degradation product and D-dimer concentration were tested by ELISA.
The incidence of reperfusion in the miniplasmin (3.0 and 1.5 mg/kg) groups was 100 % , and time to reperfusion was (3.3 ± 1.0) and (7.0 ± 2.3) min, which was shorter than rt-PA. After reperfusion, none of the vessels in the miniplasmin (1.5 and 3.0 mg/kg) groups reoccluded, whereas 20 % of vessels reoccluded in the rt-PA group. Rudimental thrombus mass in the miniplasmin (1.5 and 3.0 mg/kg) groups were smaller than rt-PA. The operative wounds in all miniplasmin groups had no hemorrhage within 2 h. There were no significant differences in thrombin time, activated partial thromboplastin time and prothrombin time. Fibrinogen concentration in the miniplasmin (3.0 mg/kg) group reduced significantly as compared with baseline and thrombosis values, whereas these values in the miniplasmin (1.5 and 0.75 mg/kg) groups were unchanged. Fibrin degradation product and D-dimer concentration increased significantly after thrombolysis.
The results suggest that miniplasmin may be useful for the treatment of thrombosis and without complication of hemorrhage. This is in contrast to rt-PA, which intrinsically has a higher risk of occurring the hemorrhage risk.