Magnetic resonance imaging in laboratory petrophysical core analysis

详细信息    查看全文

• 作者：J. Mitchell^a ; ^b ; ^{jm600@cam.ac.uk} ; ^{jmitchell16@slb.com} ; T.C. Chandrasekera^a ; D.J. Holland^a ; L.F. Gladden^a ; E.J. Fordham^b
• 关键词：MRI ; Petrophysics ; Core analysis ; Heterogeneity mapping ; Oil recovery ; Capillary pressure
• 刊名：Physics Reports
• 出版年：2013
• 出版时间：May, 2013
• 年：2013
• 卷：526
• 期：3
• 页码：165-225
• 全文大小：5070 K

文摘

Magnetic resonance imaging (MRI) is a well-known technique in medical diagnosis and materials science. In the more specialized arena of laboratory-scale petrophysical rock core analysis, the role of MRI has undergone a substantial change in focus over the last three decades. Initially, alongside the continual drive to exploit higher magnetic field strengths in MRI applications for medicine and chemistry, the same trend was followed in core analysis. However, the spatial resolution achievable in heterogeneous porous media is inherently limited due to the magnetic susceptibility contrast between solid and fluid. As a result, imaging resolution at the length-scale of typical pore diameters is not practical and so MRI of core-plugs has often been viewed as an inappropriate use of expensive magnetic resonance facilities. Recently, there has been a paradigm shift in the use of MRI in laboratory-scale core analysis. The focus is now on acquiring data in the laboratory that are directly comparable to data obtained from magnetic resonance well-logging tools (i.e.,?a common physics of measurement). To maintain consistency with well-logging instrumentation, it is desirable to measure distributions of transverse () relaxation time-the industry-standard metric in well-logging-at the laboratory-scale. These distributions can be spatially resolved over the length of a core-plug. The use of low-field magnets in the laboratory environment is optimal for core analysis not only because the magnetic field strength is closer to that of well-logging tools, but also because the magnetic susceptibility contrast is minimized, allowing the acquisition of quantitative image voxel (or pixel) intensities that are directly scalable to liquid volume. Beyond simple determination of macroscopic rock heterogeneity, it is possible to utilize the spatial resolution for monitoring forced displacement of oil by water or chemical agents, determining capillary pressure curves, and estimating wettability. The history of MRI in petrophysics is reviewed and future directions considered, including advanced data processing techniques such as compressed sensing reconstruction and Bayesian inference analysis of under-sampled data. Although this review focuses on rock core analysis, the techniques described are applicable in a wider context to porous media in general, such as cements, soils, ceramics, and catalytic materials.