Operational experience with forced cooled superconducting magnets
详细信息 查看全文
- 作者：D.P. Ivanov ; B.N. Kolbasov ; I.O. Anashkin ; P.P. Khvostenko ; W.J. Pan ; S. Pradhan ; A.N. Sharma ; Y.T. Song ; P.D. Weng
- 关键词：84.71.Ba ; 44.27.+g ; 51.50.+v ; 28.52.Nh ; 72.80.Sk ; 77.22.Jp
- 刊名：Fusion Engineering and Design
- 出版年：2013
- 出版时间：October, 2013
- 年：2013
- 卷：88
- 期：9-10
- 页码：1569-1575
- 全文大小：1496 K
文摘
Force-cooled concept has been chosen for ITER superconducting magnet to get reliable coil insulation using vacuum-pressure impregnation (VPI) technology. However 17 breakdowns occurred during operation of six magnets of this type or their single coil tests at operating voltage < 3 kV, while ITER needs 12 kV. All the breakdowns started on electric, cryogenic and diagnostic communications (ECDCs) by the high voltage induced at fast current variations in magnets concurrently with vacuum deterioration, but never on the coils, though sometimes the latter were damaged too. It suggests that simple wrap insulation currently employed on ECDCs and planned to be used in ITER is unacceptable. Upgrade of the ECDC insulation to the same level as on the coils is evidently needed. This could be done by covering each one from ECDCs with vacuum-tight grounded stainless steel casings filled up with solid insulator using VPI-technology. Such an insulation will be insensitive to in-cryostat conditions, excluding helium leaks and considerably simplifying the tests thus allowing saving time and cost. However it is not accepted in ITER design yet. So guarantee of breakdown prevention is not available.