Impact of surface plasma treatment on the performance of PET fiber reinforcement in cementitious composites

详细信息    查看全文

• 作者：J. Trejbal ; L. Kopeck&yacute ; P. Tesá ; rek ; J. Flá ; dr ; J. Anto&scaron ; M. Somr ; V. Nežerka ; ^{vaclav.nezerka@fsv.cvut.cz" class="auth_mail" title="E-mail the corresponding author}
• 关键词：Plasma ; Fiber reinforcement (E) ; Microstructure (B) ; Bond strength (C) ; Portland cement (D)
• 刊名：Cement and Concrete Research
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：89
• 期：Complete
• 页码：276-287
• 全文大小：3175 K

文摘

The purpose of this study is to demonstrate the influence of plasma treatment on the surface properties of PET fibers used as micro reinforcement in cementitious composites. The stress transfer across cracks that untreated fibers are able to accomplish can be enhanced via plasma treatment. The increase in surface roughness and the activation of polar groups result in the reduction of surface energy as observed during wetting angle measurements. The improvement in adhesion between primary (non-recycled) fibers and the surrounding matrix brought about a more pronounced strain hardening of the specimens tested in four-point bending. Plasma treatment of thinner fibers from recycled PET led to a lower capacity for transferring tensile stresses due to the reduced cross-sectional area of the fibers. The considerable bridging force provided by the plasma treated primary PET fibers resulted in the prevention of excessive and abrupt cracking, and limited crack openings.