Ramifications of high in-situ temperatures for laboratory testing and inferred stress states of unlithified sediments – A case study from the Nankai margin

详细信息    查看全文

• 作者：Andre Hü ; pers ; Stefan Kreiter ; Achim J. Kopf
• 关键词：Thermal hardening ; Consolidation ; Nankai margin ; Pore pressure ; Cementation
• 刊名：Marine and Petroleum Geology
• 出版年：2010
• 出版时间：August 2010
• 年：2010
• 卷：27
• 期：7
• 页码：1565-1571
• 全文大小：731 K

文摘

The recovery of drill cores involves changes in pressure and temperature conditions, which inevitably alter the mechanical properties of unlithified sediments. While expansion from unloading after core recovery is well studied, the effects from cooling on standard geotechnical tests are commonly neglected. Along the central portion of the Nankai margin sediments were recovered from high in-situ temperatures of up to 110 °C during IODP Leg 190. So far, the interpretation of the consolidation state of the Lower Shikoku Basin facies (LSB) entering the accretionary Nankai margin is ambiguous. Results from laboratory consolidation tests at room temperature show high pre-consolidation stresses. These were interpreted as hardening caused by cementation, while the field-based porosity vs. depth trend points towards normal consolidation. As an explanation for this discrepancy, the change of the mechanical properties by cooling from in-situ to laboratory conditions is proposed. In this paper, the results of a thermo-mechanical model are compared to published field data. This comparison suggests that the observed hardening is at least partially an artefact from cooling during core recovery, and that the strata may be considered normally consolidated to slightly overconsolidated. The latter can be explained by minor cementation or the influence of secondary consolidation. The results suggest that cooling from high in-situ temperatures may be important for the interpretation of the consolidation state of other sedimentary successions elsewhere.