Removal of boron using aluminum-based water treatment residuals (Al-WTRs)

详细信息    查看全文

• 作者：Chairul Irawan^a ; J.C. Liu^a ; ^{liu1958@mail.ntust.edu.tw"" rel=""nofollow} ; Chih-Chao Wu^b
• 关键词：Adsorption ; Aluminum-based water treatment residuals (Al-WTRs) ; Boron ; Wastewater
• 刊名：Desalination
• 出版年：2011
• 出版时间：2 August 2011
• 年：2011
• 卷：276
• 期：1-3
• 页码：322-327
• 全文大小：1016 K

文摘

Three samples of aluminum-based water treatment residuals (Al-WTR1, Al-WTR2, and Al-WTR3) were assessed as adsorbent for boron removal. The Al-WTRs were mainly composed of Al₂O₃, Fe₂O₃, and SiO₂. The adsorption reaction could be approximated by a pseudo-second-order kinetic model. The equilibrium pH (pH_e) affected boron adsorption and the optimum pH_e was found at 8.2–8.5. The Langmuir model described the adsorption data satisfactorily (R² value average 0.990), and the batch maximum adsorption capacities were found as 0.980, 0.700, and 0.190 mg/g using three samples, respectively, at pH value of 8.3 ± 0.2. Thermodynamic analysis revealed that the adsorption reaction was spontaneous and exothermic. The ΔH^o value was low (− 1.58 kJ/mol), and that was indicative of a physical adsorption. Electrostatic interactions and van der Waals force were proposed as major driving forces of adsorption under different pH conditions. Both BET specific surface area and aluminum content of Al-WTRs affected boron adsorption, as judged by the fact that Al-WTR1 showed higher adsorption density than the other two. The results of this study show that Al-WTRs can be used as an alternative adsorbent for boron removal.