Single-site and nanosized Fe–Co electrocatalysts for oxygen reduction: Synthesis, characterization and catalytic performance

详细信息    查看全文

• 作者：Valentina Bambagioni ; Claudio Bianchini ; Jonathan Filippi ; Aless ; ro Lavacchi ; Werner Oberhauser ; Andrea Marchionni ; Simonetta Moneti ; Francesco Vizza ; Rinaldo Psaro ; Vladimiro Dal Santo ; Aless ; ro Gall
• 关键词：Iron ; Cobalt ; Phthalocyanine ; Electrocatalysts ; Oxygen reduction ; Fuel cells
• 刊名：Journal of Power Sources
• 出版年：2011
• 出版时间：1 March 2011
• 年：2011
• 卷：196
• 期：5
• 页码：2519-2529
• 全文大小：964 K

文摘

The impregnation of Ketjen Black (C) with iron and cobalt phthalocyanines (MPc) taken one by one or as a 1:1 stoichiometric mixture, followed by heat treatment at 600 °C under inert atmosphere, gave materials containing arrays of single metal ions coordinated by four nitrogen atoms (M-N₄ units). Increasing the pyrolysis temperature to 800° resulted in the formation of carbon-supported, nanosized metal particles. A key role of the carbon support in determining the material structure at either temperature investigated was demonstrated by TPD, EXAFS, XANES and XRPD studies. These also showed that a Fe–Co alloy is obtained at 800 °C when the impregnation of Ketjen Black involves a mixture of FePc and CoPc. Electrodes coated with the different Fe, Co and Fe–Co materials, containing ca. 3 wt % metal loadings, were scrutinized for the oxygen reduction reaction (ORR) in alkaline media by linear sweep voltammetry. For comparative purposes, two Pt electrocatalysts containing 3 and 20 wt % metal were investigated. The electrochemical activity of all materials was analyzed by Tafel and Koutecky–Levich plots as well as chronopotentiometry. The Fe-containing electrocatalysts have been found to be highly active for the ORR in alkaline media with convective limiting currents as high as 600 A g Fe⁻¹ at room temperature and onset potentials as high as 1.02 V vs. RHE. It has been found that (i) the ORR mass activity of the Pc-derived electrocatalysts is superior to that of the Pt catalysts investigated; (ii) the activity of FePc and FePc–CoPc/C, heat treated at either 600 or 800 °C, is superior to that of the corresponding Co materials; (iii) the electrocatalysts obtained at 600 °C are fairly more active than those obtained at 800 °C.