Experimental Study on Sodiation of Amorphous Silicon for Use as Sodium-Ion Battery Anode

详细信息    查看全文

• 作者：Chek-Hai Lim^a ; Tzu-Yang Huang^a ; Pei-Sian Shao^a ; Jen-Hao Chien^a ; Yu-Ting Weng^a ; Hsin-Fu Huang^b ; Bing Joe Hwang^b ; Nae-Lih Wu^a ; ^{nlw001@ntu.edu.tw" class="auth_mail" title="E-mail the corresponding author}
• 关键词：sodium ion battery ; amorphous Si ; anode
• 刊名：Electrochimica Acta
• 出版年：2016
• 出版时间：1 September 2016
• 年：2016
• 卷：211
• 期：Complete
• 页码：265-272
• 全文大小：2095 K

文摘

Amorphous Si (a-Si) powders have been synthesized using various synthetic methods, and their electrochemical sodiation behaviours have been studied in detail. These methods include (1) a chemical delithiation method where Si is first lithiated and then delithiated either in an aqueous or organic solution, (2) a mechanical method where crystalline Si is subjected to high-energy ball milling, and (3) a mechanical fusion method where a Si-Sn composite with a Si-Sn atomic ratio of 0.94:0.06 is synthesized through high-energy ball milling. Commercial silicon monoxide (SiO) has also been examined for comparison. It is shown that facile oxidation of a-Si encountered in the methods (1) and (2) has led to low sodiation capacity and huge first-cycle irreversible capacity, similar to those of SiO. By contrast, the mechanically fused Si-Sn composite, which contains a Sn shell that prevents the oxidation of the partially amorphized Si core, exhibits a maximum sodiation capacity of 161 mAh g⁻¹ based on active material. This is translated to an estimated sodiation capacity of no more than 230 mAh g⁻¹ for the a-Si component in the composite. The presence of the Sn shell considerably reduces the first-cycle irreversible capacity and charge-transfer resistance, resulting in improved rate and cycle performance. This suggests a new material design strategy that may enable the use of the a-Si for Na-ion battery anode applications.