Outgassing of plasma facing antenna front for lower hybrid wave launcher
详细信息 查看全文
- 作者：Maebara ; Sunao ; Goniche ; Marc ; Kazarian ; Fabienne ; Seki ; Masami ; Ikeda ; Yoshitaka ; Imai ; Tsuyoshi ; et. al.
- 关键词：Outgassing rates ; CFC module ; Lower hybrid current drive (LHCD) antenna
- 刊名：Fusion Engineering and Design
- 出版年：2000
- 出版时间：November, 2000
- 年：2000
- 卷：49-50
- 期：Complete
- 页码：269-273
- 全文大小：198 K
文摘
A 3.7 GHz mock-up antenna module using carbon fiber composite (CFC) was fabricated and tested for the development of a heat-resistive front of the lower hybrid current drive (LHCD) antenna. This module has four waveguides and a water cooling channel, the length is 206 mm. The CFC surface was coated with a thin titanium layer and was plated with copper in order to reduce RF losses, to bond rods and septum plates and to assemble them with cooling channel. The RF losses and the outgassing rates of this CFC module at high RF power were measured during long pulses. When the injected power varies between 30 and 100 kW, the RF losses measured by calorimetery, were found to be in the range of 1.0–1.2 % . It is found that this experimental value is 2.5–3.0 times higher than the theoretical value of pure copper. Stationary operation of the CFC module with water cooling is performed at the RF power density of 45 MW m−2 during 1000 s. The outgassing rates from the CFC module are in the range of 0.93
1.3×10−6 Pam−3 s−1 m−2 at the module temperature of 120°C, it is low enough for an antenna material. No significant bonding defects occurred during the steady-state operation. It is assessed that a CFC module is an attractive candidate for a heat-resistive front of LHCD antenna.
1.3×10−6 Pam−3 s−1 m−2 at the module temperature of 120°C, it is low enough for an antenna material. No significant bonding defects occurred during the steady-state operation. It is assessed that a CFC module is an attractive candidate for a heat-resistive front of LHCD antenna.