Monitoring the biodegradation process of
magnesium and its alloys
in vivo is challenging. Currently, this process is monitored by micro-CT and X-ray imaging
in vivo, which require large and costly instrumentation. Here we report a simple and effective methodology to monitor the biodegradation process
in vivo by sensing H
2 transdermally above a
magnesium sample implanted subcutaneously in a mouse. An electrochemical H
2 microsensor was used to measure the biodegradation product H
2 at the surface of the skin for two
magnesium alloys (ZK40 and AZ31) and one high purity
magnesium single crystal (Mg8H). The sensor was able to easily detect low levels of H
2 (30–400 μM) permeating through the skin with a response time of about 30 s. H
2 levels were correlated with the biodegradation rate as determined from weight loss measurements of the implants. This new method is noninvasive, fast and requires no major equipment.
Statement of Significance
Biomedical devices such as plates and screws used for broken bone repair are being developed out of biodegradable magnesium alloys that gradually dissolve when no longer needed. This avoids subsequent removal by surgery, which may be necessary if complications arise. A rapid, non-invasive means for monitoring the biodegradation process in vivo is needed for animal testing and point of care (POC) evaluation of patients. Here we report a novel, simple, fast, and noninvasive method to monitor the biodegradation of magnesium in vivo by measuring the biodegradation product H2 with an electrochemical H2 sensor. Since H2 rapidly permeates through biological tissue, measurements are made by simply pressing the sensor tip against the skin above the implant; the response is within 30 s.